Frequently Asked Questions of Power Tool Cable Strippers:
PG-5 universal cable stripper is used to strip the insulation layer on the cable. The stripped diameter reaches about 25mm (diameter is 1 foot), and the depth is 0-5mm. According to the thickness of the outer insulation of the cable stripper, the adjustment screw can be used to adjust the stripping depth (0-5 MM). The operator should press the knife head and use the thumb to guide the direction, so as to peel and cut in any direction. According to the small movement and the pressure on the gear along the insulation at the same time, the peeling can be done smoothly. All-time cable stripper head can be changed between length and stripping diameter. To remove the connector on the insulation, press the blade into the insulation.
Sheath solving special tools for cable strippers:
The raw material of the insulation layer of the cable stripper is butadiene or high-pressure polyethylene. Although the diameter of the transmission line is different, as long as the depth of the cutting knife is adjusted according to the thickness of the insulation layer, the requirements can be met. It is not necessary to dismantle and replace the cutting knife because of the thickness of the insulating layer and the diameter of the transmission line.
To support the Transmission work, Marshine Power has Tubular Gin Pole, Hydraulic cable puller, wire rope pulley block, hoisting tackle, Wire rope gripper, Cable reel spool and stand- all are OEM and professionally produced per ISO 9001:2008, which are being sold to over more than 50 countries in the world. Some items like emergency restoration tower and crossing structure, we can customized, and the safety tools and accessories, are not demanded the MOQ. You can freely help you out either Tech issue or Products requirements. Pls approach us. Thanks.